Skidsteers Attachments

High Flow Brush Mower, 8" Material / 78"

Manufacturer Link: <Click Here>


	Image for reference only Actual item may look different Click on image for larger view

Manufacturer: Virnig

Model: V60 30-35, 78"

Daily: $380.00

Weekly: $1,600.00

Monthly: $3,000.00

Quantity: for a period of
day(s) week(s) month(s)

Info

78" Wide Mow Path, 84" Overall Width
Weighs 2090lbs (approx)
Cuts up to 8" Material!
Requires Poly Carbonate Front Screen to Operate. 30-35GPM Hyd Flow.
Machine Must have Rated Operating Capacity of 2500# or More to Operate
Always follow safety and operating information in this manual.
Always follow all safety and operating instructions of skid loader.
Never remove material deflectors or safety labels. Make sure all
safety labels are in place. Refer to this manual for label locations.
Never operate the V60 & V70 Open Front Rotary Brush Cutter unless
you have been properly trained.
Loader should be equipped with a shatterproof door for safe operation
of the V60 & V70 Open Front Rotary Brush Cutter.
Keep bystanders back 200 feet at all times. Do not operate near
buildings, traffic, pets or livestock.
Never allow riders on the V60 & V70 Open Front Rotary Brush Cutter,
even when the Blade Carrier Assembly is not rotating.
Use extreme care when cutting close to fences, ditches, large
obstacles, and on hillsides.
Do not operate on or drive across steep slopes.
Visit virnigmfg.com/manuals to view the most recent version.
WARNING: FLYING DEBRIS HAZARD
Failure to follow the operating height requirements below may result in
serious injury or death to the operator or bystanders. Use the brush cutter
Lift Limit Chain whenever manufacturer-designated front frame tie down points
are available. Comply with the 12 max operating height at all times. The cutter
deck should be kept as level (parallel to the ground) as practical during
operation to reduce thrown debris distance and maintain safer discharge
angles.
1. Loader WITH Manufacturer-Designated Front Frame Tie-Down Point
When a manufacturer-designated front frame tie-down point is present,
the Lift Limit Chain must be routed through that point and in use for the
entire duration of cutter operation. The Lift Limit Chain limits upward
loader-arm movement and prevents the cutter deck from reaching
hazardous discharge angles.
Failure to use the chain when a manufacturer-designated front frame
tie-down point when available may result in serious or death to the
operator or bystanders.

* Prices and availability are subject to change without notice.

* Please call us with any questions about our high flow brush mower 8 inch material / 78 inch rentals in Ukiah CA and Mendocino County CA.

Skidsteers Attachments

High Flow Brush Mower, 8" Material / 78"

Defatte Equipment Rental

Rental Categories